How to deal with brake failure when riding

Brake failure is one of the most dangerous situations you can encounter while riding, especially for e-bike riders, and it is important to know how to deal with and prevent this problem.

This guide will help you quickly master the emergency response skills for brake failure and learn how to maintain the brake system to reduce safety hazards.

1. Common causes of brake failure

Understanding the cause of brake failure is the first step to solving the problem. Here are some common brake problems:

• Brake pad wear : Brake pads have a limited life, and excessive wear can significantly reduce braking performance.
• Hydraulic brake problems : Hydraulic brake systems can fail due to air intrusion or brake fluid leakage.
• Loose or broken brake lines : The brake lines in mechanical brakes may become loose or broken after long-term use.
• Environmental Effects : Mud, rain or excessive dust may cause brakes to become unresponsive.

2. Emergency handling skills when brakes fail

If you experience brake failure while riding, the most important thing is to stay calm. Here are some practical coping tips:

• Stay calm and assess the situation : don't panic and quickly assess the condition of the front and rear brakes.
• Use auxiliary braking : Try using the foot brake (if your model supports it) or slowing down with reverse braking of the motor.
• Use terrain to slow down : Look for uphill slopes, grass, or soft ground to help you stop naturally.
• Active avoidance : avoid vehicles or obstacles and choose a safe area to stop slowly.

3. Routine brake system maintenance

Regular maintenance of your brake system is key to ensuring a safe ride. Here are some daily maintenance suggestions:

• Check the brake pads : The thickness of the brake pads should be within a safe range and be replaced in time if necessary.
• Clean Brake Parts : Clean brake discs, pads and related parts regularly to avoid dust and mud accumulation.
• Maintain the hydraulic system : Hydraulic brakes need to regularly check the status of the brake fluid and remove air from the system.
• Tighten the mechanical brake cable : Make sure the brake cable is properly tensioned and not loose or broken.

4. How to prevent brake failure

Preventing brake failure is more important than emergency treatment. The following methods can effectively reduce the risk:

• High-Quality Braking System : Choose a reliable braking configuration, such as the hydraulic brakes provided by Keteles e-bikes, for fast response and stable performance.
• Pre-ride inspection : Check whether the brakes are functioning properly before each ride.
• Safe riding habits : Avoid speeding or overloading, especially when riding on complex terrain.

5. When to seek professional help?

If the brake problem cannot be solved through routine maintenance, please contact a professional technician for inspection in time. Especially if:

• The brakes completely failed and could not be restored to function with simple adjustments.
• There is obvious oil leakage in the hydraulic brake system.
• The brake pads or discs are severely worn and cannot be replaced.

Fixing problems in time will not only extend the service life of your e-bike, but also effectively ensure your safety.

6. What kind of brake configuration is suitable for electric bicycles?

When choosing a brake configuration, it is recommended to give priority to the following points:

• Braking performance : Hydraulic brakes provide better braking power and stability than mechanical brakes.
• Durability : High-quality brake pads and cables last longer and are less prone to problems.
• Compatibility : Make sure the brake system is fully compatible with your e-bike model.

Equipped with a high-performance hydraulic brake system, Keteles e-bikes are designed for urban commuting and long-distance riding, making them both safe and reliable. If you're looking for an electric bike that combines performance with safety, look no further than Keteles!